433mhz

Program to decode radio transmissions from devices on the ISM bands (and other frequencies)

A controller for Somfy RTS shades and blinds

My Old Home Assistant Config. For more Information visit ->

433MHz temperature and humidity sensor receiver that integrates with home automation systems.

Very simple 433MHz (EU/ASIA) 315 MHz (US) RF jammer for keyless cars theft prevention

Control 433Mhz Rf power outlets from a Raspberry Pi

MQTT 433.92 MHz radio-frequency device gateway

Open the Tesla charge door with an Arduino and an ASK STX882 transmitter

ESPiLight - pilight 433.92 MHz protocols library for Arduino

Arduino Uno, 433MhzRx and OS WMR86 Weather Station

Decode tire pressure monitoring system TPMS BLE 433MHz CC1101 ESP8266 ESP32

A small Arduino library for using 315MHz / 433MHz RF modules with ATtiny13 and other low-memory microcontrollers.

Automate gate/garage door opening via 433.92MHz emitter with Raspberry Pi, Home Assistant and Homekit.

nodejs modul with protocol support for different 433mhz switches and weather stations for the RFControl Arduino library.

this is example of cloning my garage keys with Arduino Digispark and FS1000A transmitter. The keys sequences were recorded first using Universal Radio Hacker tool

Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.

🔑This is a small project about an RF module for an Arduino. This module can transmit at 433 MHz, which can be used to jam or disable a car key. ❗This project is for educational and informational purposes only. In some countries, it is illegal to block a signal. I assume no liability for any damage.❗

Just hack any 433MHz device!

RF (433Mhz) to MQTT Bridge - with hardware

Linux device driver for the Texas Instruments CC1101 radio