gprs

A small Arduino library for GSM modules, that just works

Ai-Thinker A9/A9G GPRS (with GPS(A9G)) module C development SDK

Example of using ESP32 with GSM modem and lwip+pppos

GTP (GPRS Tunneling Protocol) implemented in pure Golang.

User Plane Gateway (UPG) based on VPP

Arduino driver for GSM/GPRS module SIMCom SIM800L to make HTTP/S connections with GET and POST methods

STM32 HAL library for SIM800 release MQTT client over AT command

Datalogger for MicroPython and CPython.

GPS IoT tracker board for scanning gps and environment information and sending this to a MQTT server via GPRS.

Arduino-compatible MCU firmware code for sensor-, telemetry-, and gateway-appliances.

Osmocom Transceiver used by GSM Base Transceiver Station (BTS); mirrored from https://gitea.osmocom.org/cellular-infrastructure/osmo-trx

lwIP PPP porting for GSM modem (like sim800)

Osmocom Gateway GPRS Support Node; Mirror of https://gitea.osmocom.org/cellular-infrastructure/osmo-ggsn

Internetgateway with TTGO T-Call

IoT Communications Module for Energy Access. An easy way to get production ready, bi-directional communications for your IoT embedded device. Proiect supported by the EnAccess Foundation - https://enaccess.org

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Enables GSM/GRPS network connection using the GSM/GPRS modules. Use this library to make/receive voice calls, to send and receive SMS using Generic GSM/GPRS modules, such as u-blox SARA-U201 module.This library also allows you to connect to internet through the GPRS networks. You can either use Web Clients and Servers.

Connected GPS tracker PCB

doc of https://github.com/Ai-Thinker-Open/GPRS_C_SDK

Pure Rust implementation of 3GPP GTP (GPRS Tunneling Protocol) - GTPv1 and GTPv2