bmp280

Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

BMP280 full-featured driver library for general-purpose MCU and Linux.

module for the BMP280 sensor

air quality sensor based on ESP32

BMP280 / BME280 driver STM32 HAL I2C

Go·Hardware·Lean - Host drivers

A platform agnostic Rust driver for the Bosch BM[PE]-280

Libraries for STM32 (STM32F103C8T6) on pure CMSIS.

Rocket flight recorder based on Raspberry Pi Zero W

BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.

ESP8266 and BME280 sensor for a minimalist weather station to put on your terrace

基于stm32-f4智能气象站及Wi-Fi开关，提供温度、气压、湿度及光强度测量、服务器上报，以及Wi-Fi控制下的GPIO口。Intelligent Weather Station and Wi-Fi switcher providing temperature ,atmosphere pressure ,humidity and lightness detecting and reporting .Also the control of GPIO in Wi-Fi.

Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

ESP32/ESP8266 arduino script for an AHT20 + BMP280 only with Wire.h

Weather Display (7.5in eInk) with an ESP32, indoor sensors, receiving data from OpenWeatherMap.org

A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.

Air Quality with CJMCU-8128 (board with CCS811 / BMP280 and SI702x)

An all-in-one ESP8266 based weather station.

Some Python Sensor Scripts for raspberry pi. Including Homie MQTT and MQTT publishing

Erriez Arduino libraries